So, i've got this 90s phazer, that was running fine, brought it in to try and hook up the light, then I had lost spark. Changed stator plate, Coil, CDI... still no spark.
By using a Test light, with the ground wire from stator to cdi hooked up, and test light into the Orange from cdi wire connector the RED light flashes, but then once the ground is Unhooked the RED & GREEN light flash.
And Barey anything with ground hooked up.
Put test light into The bottom end of COIL plugin and Nothing. So there is resistance somewhere between that one plugin, but it doesn't make sense, because should you not still have power on the bottom of coil even if its shot. Until the unit itself.
HAVE power from stator, to CDI, through CDI to end of plugins, then @Coil plugin, it's gone.
First stator 13.5ohms
Second stator 15.0ohms
In the pictures provided is where spark is lost.
By using a Test light, with the ground wire from stator to cdi hooked up, and test light into the Orange from cdi wire connector the RED light flashes, but then once the ground is Unhooked the RED & GREEN light flash.
And Barey anything with ground hooked up.
Put test light into The bottom end of COIL plugin and Nothing. So there is resistance somewhere between that one plugin, but it doesn't make sense, because should you not still have power on the bottom of coil even if its shot. Until the unit itself.
HAVE power from stator, to CDI, through CDI to end of plugins, then @Coil plugin, it's gone.
First stator 13.5ohms
Second stator 15.0ohms
In the pictures provided is where spark is lost.
90s Phazer [SPARK ISSUE]
0 commentaires:
Enregistrer un commentaire