Affichage des articles dont le libellé est 89 yamaha phazer. Afficher tous les articles
Affichage des articles dont le libellé est 89 yamaha phazer. Afficher tous les articles

89 yamaha phazer

mardi 18 octobre 2016

I have just joined this forum and had a puzzling question.

My sled is an 89 yamaha phazer. Great sled. I have a problem with it not firing up. I got it all cleaned up this year after it not running last year.
I started it up and it ran okay for a few minutes then it died out. Tried to start it again and it didnt even fire. I checked psi in both cylinders and i have about 105 psi in both. Plugs are wet. Weird part is that when i take off the left side plug wire there is still no fire. But when i use an old plug just to test spark on the ground it fires and barely idles on the right cylinder. Put the wire back, nothing again. Did this a few times with the same result.
I swapped out cdi boxes and coils and same result still.
Tested the ohms on the stator and its still in the green.
I think there is a timing issue because before this issue the left cylinder wouldnt fire right on idle. I could take off the wire and it would idle the same if the wire was on. But no idle if i pulled the right side wire.
But i want to ask you guys too see what you think before i tear things apart.


89 yamaha phazer
 

Lorem

Ipsum

Dolor