89 yamaha phazer

mardi 18 octobre 2016

I have just joined this forum and had a puzzling question.

My sled is an 89 yamaha phazer. Great sled. I have a problem with it not firing up. I got it all cleaned up this year after it not running last year.
I started it up and it ran okay for a few minutes then it died out. Tried to start it again and it didnt even fire. I checked psi in both cylinders and i have about 105 psi in both. Plugs are wet. Weird part is that when i take off the left side plug wire there is still no fire. But when i use an old plug just to test spark on the ground it fires and barely idles on the right cylinder. Put the wire back, nothing again. Did this a few times with the same result.
I swapped out cdi boxes and coils and same result still.
Tested the ohms on the stator and its still in the green.
I think there is a timing issue because before this issue the left cylinder wouldnt fire right on idle. I could take off the wire and it would idle the same if the wire was on. But no idle if i pulled the right side wire.
But i want to ask you guys too see what you think before i tear things apart.


89 yamaha phazer

0 commentaires:

Enregistrer un commentaire

 

Lorem

Ipsum

Dolor