Hello, cleaned the carbs on the last 2 sleds today. I noticed when putting the carbs back on the 98 that one of the cams in the primary was at a slight angle. So I`m thinking it may be time to rebuild it. new bushings and pins and whatever else. I tried looking up kits, but they are vague. what do I need to do it complete. the spring was replaced 3 years ago. What is needed for the spider, roller/washer/bearings and, pins and buttons. and then cam arm bearings, pins and nuts. This is what I`m seeing off country cats website.
Any ideas.
Any ideas.
1998 zl500 clutch rebuild
0 commentaires:
Enregistrer un commentaire