I have a heavily modded 85 Phazer with stock Mikuni carbs on it. When I got the sled it hadn't run in a couple of years and the carbs were really gummed up. I took the carbs off and cleaned them up and had the sled running long enough to ride it about 2-3 miles. Man it ran good. Then it started backfiring and cutting out, starving of fuel. I took the carbs out, the jets were plugged again. I replaced the needles and seats, floats, plugs, jets, float bowl gasket and cleaned the carbs in an ultrasonic cleaner etc. I got it running again but it started leaking from the float bowls. I took the carbs out again and straightened the float bowl bottoms out on the vice and sanded the washer gasket and float bottoms and it still leaks. Can I get new washers? If so do you have a part number?
85 Phazer carbs leaking from float bowl.
0 commentaires:
Enregistrer un commentaire