Weird problem. This sled runs great for about an 1/2 hour. Down the trail 5 miles and start climbing hills and it starts bogging (I think running on one cylinder). Pulled plugs. One clean, one wet. Put in new, runs for 15 minutes then bogs. Hard to test. It will run down the trail while bogging but not to fast. Let it sit 15 minutes and it runs fine again for 15 minutes. Brought it home. Checked electricals, but of course it starts right up and runs fine. My first assumption is no spark on one cylinder(PTO side). The ignition system is a "waste" spark system. One pickup (2 magnets) one cdi, one coil with one primary and two secondaries. Fires each plug 2 times a revolution. I have a 08 600 rmk which has the same system so I am going to swap from the coil out to see if it changes. Any other thoughts? I have not yet verified it is a spark problem. I have a tester but not been able to use it as it takes so long to get a failure.
2008 RMK Shift 600 Spark One CYL
0 commentaires:
Enregistrer un commentaire