My son put a rod through the case on his 01 Summit 700. I found a recently overhauled 02 Summit 700 engine and thought this would be an easy swap. A couple of differences and done.
The trigger coil ignition system or magneto has 2 extra wires due to a second trigger and a different plug going to the MPEM. I verified this off of both wiring diagrams. It has 4 wires and a second trigger on the 02 engine. I have 2 choices as I see it. Change out the magneto with the original connector plugs or change out the connector 4 plug to the 2 plug and use the same 2 wires as the 01 uses and fold back the wires for the second trigger coil and leave it.
1. Has anyone done this re-wire with success?
2. Or should I just change out the magneto and harness?
As always, thanks in advance for,
Lyle
The trigger coil ignition system or magneto has 2 extra wires due to a second trigger and a different plug going to the MPEM. I verified this off of both wiring diagrams. It has 4 wires and a second trigger on the 02 engine. I have 2 choices as I see it. Change out the magneto with the original connector plugs or change out the connector 4 plug to the 2 plug and use the same 2 wires as the 01 uses and fold back the wires for the second trigger coil and leave it.
1. Has anyone done this re-wire with success?
2. Or should I just change out the magneto and harness?
As always, thanks in advance for,
Lyle
Summit 700 2002 engine into a 2001 machine?
0 commentaires:
Enregistrer un commentaire