Odd thing happened today. Went on a long ride. Halft way through my ride, when I tried to hit my kill switch, my machine would not shut off. I have my key bypassed, so that was sure frustrating. When I got home, I decided to look at it. I hooked the key back up just so I would have a way to shut it down.
Steps to troubleshoot.
1) Disconnected the Black/Brown connector coming from the kill swtich.
2) Did a continuity test on the two wires coming from the switch. When in the "ON" position, it measured OPEN, when in the "OFF" positions, it measures CLOSED. This is the way it should be.
3) I took the wire that goes from the KILL switch to, I believe the stator, and tried to close them manually and it did not kill the engine.
4) Checked wires going to the CDI from the Stator, all have good solid connections
BTW, the stator is new. This was only its second ride.
Any thoughts on where to look next? Ever seen this happen? Odd!!
Steps to troubleshoot.
1) Disconnected the Black/Brown connector coming from the kill swtich.
2) Did a continuity test on the two wires coming from the switch. When in the "ON" position, it measured OPEN, when in the "OFF" positions, it measures CLOSED. This is the way it should be.
3) I took the wire that goes from the KILL switch to, I believe the stator, and tried to close them manually and it did not kill the engine.
4) Checked wires going to the CDI from the Stator, all have good solid connections
BTW, the stator is new. This was only its second ride.
Any thoughts on where to look next? Ever seen this happen? Odd!!
Polaris Indy 700 RMK (1998) Kill Swtich
0 commentaires:
Enregistrer un commentaire