So the belt busted at WOT and got tangled around the crankshaft , between the clutch and the oil seal.
Brought the skidoo back home, took off the clutch, and the damn seal melted with the belt. and part of it go stuck in the engine (Where it new seal slide in the engine), so i've used a heat gun and a pick to take off as much as I can and get it pretty much done but there still maybe a 1/16 of seal stuck on the block and i can't reach it. I've tried to hammer down the new seal with ABS and wood, it won't go in completely, anything I can do to fix that?
Here's the picture of the carnage : http://ift.tt/2ksByHi
I did a leak test (Block the carb while the engine running) and engine stalled so i guess the seal is sealing properly.
Should I leave it as is and hope for the best?
Thanks,
Brought the skidoo back home, took off the clutch, and the damn seal melted with the belt. and part of it go stuck in the engine (Where it new seal slide in the engine), so i've used a heat gun and a pick to take off as much as I can and get it pretty much done but there still maybe a 1/16 of seal stuck on the block and i can't reach it. I've tried to hammer down the new seal with ABS and wood, it won't go in completely, anything I can do to fix that?
Here's the picture of the carnage : http://ift.tt/2ksByHi
I did a leak test (Block the carb while the engine running) and engine stalled so i guess the seal is sealing properly.
Should I leave it as is and hope for the best?
Thanks,
Oil Seal PTO Side
0 commentaires:
Enregistrer un commentaire