Arctic Cat Cougar, 1986 - 500cc
I rigged aftermarket handlebar warmers and used the existing wiring. What happens is the resistor gets crazy hot on low, and on high the tach and headlight go out. Well, the headlight has about 5% brightness, but the tach is gone.
I used the same power lead and ground wires, so I don't get what could be messing up the circuit. I think the warmers I used are for a 12V system, which I do not have - no battery, so it runs on AC, but I thought that would not matter.
I rigged aftermarket handlebar warmers and used the existing wiring. What happens is the resistor gets crazy hot on low, and on high the tach and headlight go out. Well, the headlight has about 5% brightness, but the tach is gone.
I used the same power lead and ground wires, so I don't get what could be messing up the circuit. I think the warmers I used are for a 12V system, which I do not have - no battery, so it runs on AC, but I thought that would not matter.
Handlebar Warmer Wiringdlebar
0 commentaires:
Enregistrer un commentaire