I am changing my fan bearings on a 86 Yamaha SRV 540. The fan shroud looks so fragile, so before I break something I would like to know the proper way to remove the bearing. At first I wanted to hammer the two bearings out through the fan shroud. But after looking at the parts drawing it looks like there is a circlip and washer between the two bearings. Therefore the bearings have to pulled out? Any ideas on the proper way to do this? Do I just heat up the housing and try and pull it out? Thanks in advance!
Yamaha SRV540 fan bearings
0 commentaires:
Enregistrer un commentaire