Hi
I am replacing all the fuel and oil lines on a 2000 Mountain Max. I have a couple of questions if anyone is on the forum at this time of year.
1. Is there a good material to replace the in-tank line that goes to the filter? The line I took out is too short to replace the filter so I just had to pull it off. Is should be about 2 longer. It looks to be 5/16". Only after-market, submersible material is really expensive, it does not look flexible and is probably to large to fit through the tank hole. Any ideas?
2. Can I use regular fuel line on the oil pump pulse line?
3. The oil lines are clear and have an odd clamp. Is there a good replacement material?
Thanks
John
I am replacing all the fuel and oil lines on a 2000 Mountain Max. I have a couple of questions if anyone is on the forum at this time of year.
1. Is there a good material to replace the in-tank line that goes to the filter? The line I took out is too short to replace the filter so I just had to pull it off. Is should be about 2 longer. It looks to be 5/16". Only after-market, submersible material is really expensive, it does not look flexible and is probably to large to fit through the tank hole. Any ideas?
2. Can I use regular fuel line on the oil pump pulse line?
3. The oil lines are clear and have an odd clamp. Is there a good replacement material?
Thanks
John
Summer Maintenance
0 commentaires:
Enregistrer un commentaire