Engine swap

Would a 1990 indy 500 engine fit in a 1996 indy classic chassis?

Engine swap

1989 Yamaha Exciter 570 $1499

This is a 1989 Yamaha Exciter 570. Electric start, this is a one owner sled, very good shape for the year. Kept indoors when not being used. If you are interested in this machine message me, or call 716-701-1868. Located in Limestone, NY

Attached Thumbnails

         

1989 Yamaha Exciter 570 $1499

Trouble with 94 VMAX 600

Hello, I recently got a snowmobile gifted to me and am having some trouble fixing it.
When I start the snowmobile it runs good for 5-10 minutes and then it dies. I have tried cleaning the carb and the plugs are good. I can't figure out what is wrong with it and am unable to find out what is wrong. If anyone has any suggestions please let me know.

Thanks
-Jack

Trouble with 94 VMAX 600

No Reverse - 2003 MXZ 600 SDI

Starts and runs but when I hit the reverse button it just dies. On occasion the battery light beeps when I press the start button before I pull it over.

Just wondering if it could be an issue with the battery or if its something else. I read somewhere it could be the idle but its an SDI and I don't think I can/should adjust the idle.

Thanks.

No Reverse - 2003 MXZ 600 SDI

1995 Indy 500 EFI - Air Temp Sensor Required?

Good morning,

The sled currently runs without the air temp sensor (wires are severed). Do I need to be worried about replacing this before I drive it? I am not getting an error code on the ECU...

Thanks!

1995 Indy 500 EFI - Air Temp Sensor Required?

06 Fusion 900 no reverse. any ideas?

i was wondering if anyone has had similar issues wither their reverse not working. i went through and read a few different forums and i don't seem to be having the same issues as others. my fusion 900 idles between 1800-2100 rmp, the sled is warmed up and at operating temps when i try it, all wires that i have traced from the handlebars are connected where they should be and everything else on the sled works fine, just no reverse. press the reverse button and nothing happens. its supposed to shut the sled down and restart it in reverse, then vise versa when you press it again to go forward. does anyone have any ideas for what could cause this? I'm going to tear the switch apart and see if there is anything wrong with it, but I'm just looking for some other general feedback from similar issues and how it got resolved instead of possibly wasting money i might not need to. thanks.

06 Fusion 900 no reverse. any ideas?

02 rmk 800

Looking at buying a 2002 RMK 800 with 3900 miles test rode it today seems to have an incredible amount of power. Is this a sled that I should have some concerns with? the guy that has it has done nothing to it, He's got a 2001 RMK with 4500 miles and put a new top end in it as well as a new stator. The 02 has a reverse mode. I've done a little research and read that there have been some bearing issues on the crank. should I stay away from it? He wants $1800 Thanks, Tracy.

02 rmk 800